Formatting An HDD, when fdisk won't

ဒီတစ္ခါအေရးၾကီးတယ္ေနာ္ " At your own risk!!!! " ကုိယ္ HardDisk က Fdisk နဲ ့ မရမွေနာ္...
HardDisk မွာ၇ွိတဲ့ Dataေတြ , Software ေတြ , Application ေတြ အားလုံးအားလုံးလစ္ျပီေနာ္
Advanced User ေတြ နဲ ့ ကလိခ်င္တဲ့ friends ေတြ ခ်သာခ်သာပါ။
Bad Sectorအရမ္းမ်ားတဲ့စက္ေတြမွာ fdisk won't အျဖစ္မ်ားတယ္။ ကၽြန္ေတာ္လည္းလက္တည္ ့စမ္းၾကည့္တာ........................................................
                                 ***
                        This is my favorite way to wipe it clean:
                                       CAUTION: 
 This debug script is for advanced users only. Its Purpose is to remove all formatting and partitioning information from your hard disk when FDISK
is unable to do so.
THIS WILL REMOVE ALL DATA AND PROGRAMS FORM THE DRIVE.

1. Create a MSDOS bood disk with Debug

2. At DOS command prompt type the following: Debug[Enter] (Where enter is to press the enter key once)
NOTE: Type the following bolded text only. You will recieve an error if you type anything other than the bold text.

The non-bolded text represents what will appear on you screen once you press [Enter] after each command.

-F 200 L1000 0 [Enter]
-A CS:100 [Enter]
xxxx:0100 MOV AX,301 [Enter]
xxxx:0103 MOV BX,200 [Enter]
xxxx:0106 MOV CX,1 [Enter]
xxxx:0109 MOV DX,80 [Enter]
NOTE: ( --- "80" for hd0, "81" for hd1)
xxxx:010c INT 13 [Enter]
xxxx: 010e INT 20 [Enter]
xxxx: 0110 [Enter]
-G [Enter]

"Program terminated normally"

3. Turn off the computer. On the next startup the hard drive will need to be partitioned and formatted.
This was originally posted by andro11meda in Hardware and Networking Support. It worked  so well for me on a problem-computer thatI was working on that I had to post it in tutorials.
Thanks andro11meda!!